UP↑SCALE › BUSINESS & PRODUCTION › MANUFACTURERS & WORKSHOPS

The scale for manufacturers and workshops

Screws to count, parts to grade, molds to fill, a machine to stop at the right gram: in a workshop the scale is a production tool. UP↑SCALE turns your bench and floor scales into a counting system, a sorting station and a filling controller.

  • Counting with a reference scale
  • Several scales counting together
  • Sorting into up to 42 classes
  • Filling machines stopped over ESP-NOW

In short

UP↑SCALE is one scale app for the scales you already have, also old floor scales with an RS-232 port. Manufacturers and workshops count parts with a reference scale, sort by weight into up to 42 classes, fill molds and stop filling machines over ESP-NOW with a cut-off that learns. Counting is free; sorting, filling, machine control and more scales need PRO, from 4.43 EUR a month or 119.90 EUR once.

What helps you most

1Counting with a reference scale FREE

Count a sample on your fine scale - its piece weight goes to the big scale with one click, like the reference counting of industrial counting systems. The piece weight gets more exact by itself while you add pieces, and the app tells you up to how many pieces the count is exact.

2Many scales count together FREEPRO

Fill bins on as many scales as you need: every scale shows its own pieces, the big number is the sum of all - live, wireless, with the total weight, the label and the log. In check-weighing and sorting each scale is a device of the same program. 1 extra scale free, more with PRO.

3Sorting and grading by weight TRY 14 DAYS FREEPRO

Up to 42 classes of your own: put one part after the other on the scale, and it is sorted, counted and summed - with a coloured bar that shows where in its class it is. Eggs, fruit, castings, gems, anything. ESP-NOW devices can show the class or drive a gate.

4Mold and container filling TRY 14 DAYS FREEPRO

Define your molds with their cavities: the factory mode guides the filling cavity by cavity, shows what to add or remove, and keeps the averages of every mold and cavity - also for people who don't like numbers.

5Machine control with a cut-off that learns TRY 14 DAYS FREEPRO

Pumps, valves and augers over ESP-NOW radio: the scale stops the fill early - by flow rate × delay - and learns the delay of your machine from every fill, so the material still falling hits the target - and it learns never to underfill: it aims just above the target, by as much as your machine scatters. Machines with two speeds also get a slow-down signal shortly before the target (coarse / fine dosing). No fixed cut-off to tune again and again, no expensive filling controller. Example code for the ESP32 on the other side is included.

With PERFECT -0 % / +3 % (the usual setting for prepackages) it aims at +1.5 % above the target, never above the PERFECT range. A pause of up to 120 seconds before the next filling gives you time to move the mold to the next cavity by hand - or for your own mold transport.

6Quality: statistics and records FREEPRO

Mean, standard deviation, Cp/Cpk, run chart and histogram for every pack, cavity or class. With ENTERPRISE: users, an activity log and sealed reports for your customers and audits.

Mixing in fixed proportions PRO

Resin and hardener, paint and thinner, glue, cleaner: type the parts (say 100 : 45) and weigh one after the other with a live bar. If too much hardener goes in, press 🧮 - the other ingredients are calculated again for the same proportion, so the batch is not wasted. Saved mixes open at a button, and every phone or PC shows the same rows.

Tips from the practice

  • Count the sample on the finest scale you have - the count on the big one is only as good as the piece weight.
  • Stable bench: the environment test measures how calm your table is and recommends the filter setting.
  • Old floor scale with RS-232? The adapter makes it a device - no new scale needed.
  • A silo or tank on load cells? The tracking mode watches a LOW and a HIGH limit with a hysteresis - one alarm per refill, also with the app closed, and over ESP-NOW to your own devices (fixed limits, Zero Memory).

Filling and quality in the app

A mold filled cavity by cavity with the machine in the slow feed, the cut-off that learned the lag of the machine - and the statistics of a whole series.

The factory mode filling a mold of 12 cavities: cavity 5, 19.2 g, too little but OK, add 0.8 g - the filling machine is in the slow feed
Filling a mold: cavity 5 of 12, slow feed
The cut-off of the filling machine with the learned lag, slow down 15 percent before the target and a pause of 2 seconds - and the totals: 7 cavities of 20 g, every one a little above the target, plus 0.3 g on average
Never under: +0.3 g per cavity on average
Statistics of 48 bags of gummies: mean 50.09 g, standard deviation, in perfect / OK / outside, Cp and Cpk, run chart and histogram
48 bags of gummies at a glance

More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.

Counting, sorting and filling: questions and answers

How does a counting scale with a reference scale work?

Count a small sample on your finest scale. Its piece weight goes to the big scale with one click, and the big scale counts the whole bin. The piece weight gets more exact by itself while you add pieces, and the app tells you up to how many pieces the count is exact.

Why is my parts count on the scale wrong?

Usually the piece weight is too rough: a few pieces on a coarse scale. Count the sample on the finest scale you have, add pieces so the piece weight can improve, and keep the bench calm - the environment test measures it and recommends a filter setting.

Can several scales count together?

Yes. Every scale shows its own pieces, and the big number is the sum of all of them - live and wireless, with the total weight, the label and the log. One extra scale is free, more with PRO.

Can a scale sort parts by weight?

Yes, into up to 42 classes of your own: put one part after the other on the scale, and it is sorted, counted and summed, with a bar that shows where in its class it is. ESP-NOW devices can show the class or drive a sorting gate.

Can a scale stop a filling machine at the right weight?

Yes. Over ESP-NOW radio the scale stops pumps, valves and augers early - by flow rate × delay - and learns the delay of your machine from every fill, aiming just above the target so it never underfills. Two-speed machines also get a coarse / fine signal. Example code for the ESP32 on the machine side is included (PRO, with a 14-day free trial).

How do I mix resin and hardener by weight in the right ratio?

Use the solution mode (PRO): type the parts (say 100 : 45) and weigh one after the other with a live bar. Too much hardener? Press 🧮 and the other ingredients are worked out again for the same ratio, so the batch is not wasted.

Can I use an old floor scale with an RS-232 port?

Yes. The adapter turns it into a connected scale - no new scale needed. It also works with bench and lab scales, from micrograms to tons; model by model on every scale.

Does it show Cp / Cpk for my filling or parts?

Yes. The statistics show the mean, standard deviation, Cp / Cpk, a run chart and a histogram for every pack, cavity or class. With ENTERPRISE: users, an activity log and sealed reports for your customers.

Last updated · by Johann Anderson, FARM 23 SL

READY TO UP↑SCALE YOUR SCALE?

Start with the free version - the board costs under 15 EUR and you may never need more. If you do, unlock PRO from 4.43 EUR a month, 46.90 EUR a year or once for 119.90 EUR incl. VAT - or ENTERPRISE & COMPLIANCE from 13.00 EUR a month (once: 599.00 EUR). The lifetime licences are once and forever, no subscription needed; no advertisements, everything works offline, updates stay free.