UP↑SCALE › LABS, QUALITY & METROLOGY › SERVICE TECHNICIANS & INSPECTORS
A test suite for service technicians and inspectors
Plug in, test along the procedure, hand over a numbered test record, the calibration certificate of your lab or the service document - sealed by the scale and recorded while you test. UP↑SCALE brings the tests of OIML R 76-1 Annex A, NIST HB 44 and EURAMET cg-18 to every scale with an RS-232 port - and to the tablet in your bag.
- OIML R 76-1 or NIST HB 44 tests, any maker
- Calibration certificates along EURAMET cg-18
- Service documents after a repair
- Customers' scales and due dates in registers
In detail: Scale calibration & tests
In short
UP↑SCALE is one scale app for the scales of any maker, also with typed readings. Service technicians and inspectors run the tests of OIML R 76-1 Annex A or NIST HB 44 at the scale, calibrate along EURAMET cg-18 and issue service documents - recorded while they test, numbered and sealed. The simple tests are free, the extended ones PRO; sealed reports and certificates need ENTERPRISE, 144.00 EUR a year.
What helps you most
1The tests at the scale FREEPRO
Guided step by step, each value taken by itself when stable: repeatability, eccentricity (corner load), accuracy and linearity (weighing up and down), tare, zero-setting and the zero indicator, discrimination, creep and zero return (30 min, or the 4 h alternative), warm-up (0, 5, 15, 30 min) and stable equilibrium. The results are judged against the maximum permissible errors of the accuracy classes that fit e and n of the scale - for every range of a multi-interval scale. Free: repeatability, eccentricity, the weighing test, the calibration check and the routine check on the screen; PRO: the other tests and a plain print of a single test. Judged by OIML R 76 / EN 45501 or NIST HB 44 (region preset EU / EEA, DE, CH, UK, US), for verification or in-service inspection (2 × mpe) - free in every edition. A scale without a data port? Type its readings.
The jobs in detail: Scale Test Suite
Manual: the tests, R 76 or HB 44, typed readings
Every test, its limits and the checklist →
2A checklist per procedure FREE
What is done, what is still open - for a verification, an inspection in use or a calibration. The overview names the clause of the standard for each test and takes you to it with one click.
Manual: checklist
3The strict procedure PRO
Switch it on and the test follows OIML R 76-1 Annex A as closely as a self-check can: the loads of the standard (Min, the mpe change points, Max), preload, the legal display with the ΔL input at every row, repeatability with the number of weighings of the class, the warm-up time and the tolerance of your test weights - with a checklist in the report.
Manual: strict procedure
4A final report with your name and signature ENTERPRISE
Your data (name, company, ID, place, remarks) and your signature drawn on the screen go into the final report: a summary per procedure, the tables, date, signature and stamp fields, on certificate-style pages - as print, PDF or HTML, plus CSV.
Manual: for inspectors, reports
5Numbered and sealed by the scale ENTERPRISE
The report gets a running number from the scale and the seal of the scale (ECDSA). Your customer - and any auditor - can check on up-scales.com/check that it was not changed after you signed it, and which scale made it.
The jobs in detail: Audit Trail & Sealed Records, Device Qualification
6Profiles, register and history PRO+ ENTERPRISE
One adapter for many scales of your customers: save each scale as a scale profile (PRO 3, ENTERPRISE 50) with its data, and its test records stay with it. The equipment register keeps the interval and the due date, the test history stays on the scale with a trend.
Every scale of the register has a register card: maker, model and serial number, the last test with its result, the next due date, the status and your links to SOPs and manuals. Its QR sticker on the scale opens the card with the scanner of the app. A problem report goes into the activity log of the scale; marked OUT OF ORDER, the scale starts no program and books no sale until an ADMIN or a QM releases it - the tests stay open, so you can check it after the repair. ENTERPRISE
Manual: scale profiles, register and history, register card and QR sticker, problem report and OUT OF ORDER
7Calibration certificates and service documents ENTERPRISE
Calibrate any maker's scale along EURAMET cg-18 with the uncertainty of every load, computed on the UP↑SCALE; keep your customers' scales with due dates and your test weights (OIML R 111, ASTM E617, NIST class F) in registers. Issue the certificate of your lab - standard, or with your own accreditation - after the app checked its completeness against the listed rules. For the legal metrology the app fills in the Placed in Service Report of a US registered service agency, the repair and test protocol for the German verification authority, or the verification certificate of a private body (AT, ES, FR, IT, BE, SE) - always the document of the agency, company or body that issues it. One data file takes everything to the next tablet.
Manual: scale calibration, certificates, service documents, data file
Tips from the practice
- Pre-check before the official visit: owners can run the same tests first - a failed appointment costs the call-out and a second visit.
- Buying a used scale? Test it on the spot, before the money is gone.
- The maths is checkable: the reference cases of the validation are public.
The test report is a test record the signing person is responsible for - no official verification. Certificates and service documents are the documents of your lab, your company or your body: the app fills them in and checks their completeness against the listed rules, the content stays your responsibility. No logos of an authority come with the app. Whether a record is accepted, and the legal verification itself, stay with the authority.
The test suite in the app
The corner load test and the accuracy & linearity test as you see them at the scale: every value, its error in d and the limit.


More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.
Examples from the daily work
Outside at your customers or inside your own business: the weighing with your test weights stays the same - the writing, looking up and typing afterwards goes away. Everything is recorded while you test.
The yearly calibration round at a customer ENTERPRISE
The job: a service company calibrates the 8 scales of a food producer once a year. With UP↑SCALE: the due list showed the customer weeks before, also as a calendar file. On site you open each scale from the register of your customers' scales, the app picks the test weights for every load from your weights register, and the readings come from the scale when stable - from a scale without a data port you type them, and they are marked as typed. The errors of indication and their uncertainty along EURAMET cg-18 are worked out on the UP↑SCALE; the certificate of your lab is checked for completeness and issued before you leave.
Recorded while you work: every reading, the weights used with their certificates, the conditions, the certificate with its number in the certificate register, the next due date. Saved: the evening of typing up 8 certificates.
Repaired - and back into service ENTERPRISE
The job: a load cell of a verified shop scale is replaced. With UP↑SCALE: the tests run along OIML R 76 / EN 45501 or NIST HB 44, judged for verification, with the strict procedure if you like. From the results the app fills in the Placed in Service Report of a US registered service agency, the repair and test protocol for the German verification authority, or the verification certificate of a private body in Austria, Spain, France, Italy, Belgium or Sweden.
Recorded while you work: the seals removed and applied, the type approval, the software and the event counter - in the document and in the register of the scale, numbered and sealed. Saved: filling in the form by hand and copying the readings into it.
In-house: the check before use FREE+ ENTERPRISE
The job: the technician or shift lead of a bakery, a packer or a lab checks the scales every morning, and once a month runs the corner load and repeatability tests of the HACCP plan or the SOP. With UP↑SCALE: the routine check takes one test weight and gives its verdict at once; the monthly tests are guided step by step. The equipment register shows what is due next.
Recorded while you work: the test history stays on the scale with a trend; with ENTERPRISE each record carries the user, a number and the seal, and goes into the activity log. Saved: the paper sheets next to the scale - and the search for them before an audit: the auditor checks the sealed files on up-scales.com/check.
Many customers, one bag - and the whole team PRO+ ENTERPRISE
The job: several technicians serve the same customers. With UP↑SCALE: one RS-232 adapter keeps the scale profiles of your customers' scales (PRO 3, ENTERPRISE 50); your test weights are in a register with class, certificate, issuer and due date, so every certificate names the right weights by itself. One data file takes the customers, their scales, the test weights and the certificates to a colleague's tablet - merged, with every history kept.
Recorded while you work: every change of a scale, a weight or a certificate in a chained history; a scale is retired, never deleted. Saved: the lists in spreadsheets and the phone calls "which weights did you use there?".
Time per scale: paper and UP↑SCALE
| Task | Paper, typed later | UP↑SCALE |
|---|---|---|
| Find the last record and the data of the scale | 5 – 10 min | under 1 min - register and history |
| Look up the limits for class, e and load | 5 – 10 min | none - worked out per rule |
| Write down the readings, type them in later | 15 – 30 min | none - taken when stable |
| Errors and uncertainty in a spreadsheet | 10 – 20 min | none - on the UP↑SCALE |
| Write the certificate or service document | 15 – 30 min | 3 – 5 min - check, sign, issue |
| File it, plan the next date | 5 – 10 min | none - register and due list |
| Together | 55 – 110 min | about 5 – 10 min |
Our estimate, not a measurement. The weighing with your test weights takes the same time in both columns. For a round of 8 scales that is about 7 – 15 hours of writing and typing against about one hour. For a whole lab: the cost table of the QA guide.
Scale testing: questions and answers
Which OIML R 76-1 tests can I run at the scale?
Repeatability, eccentricity (corner load), accuracy and linearity up and down, tare, zero-setting and the zero indicator, discrimination, creep and zero return, warm-up and stable equilibrium - guided step by step, each value taken by itself when stable, and judged against the maximum permissible errors of the class that fits e and n of the scale. Every test and its limits.
Can I do a calibration along EURAMET cg-18?
The checklist has a calibration procedure along EURAMET cg-18 with repeatability, eccentricity and the errors of indication, next to the procedures for a verification and an inspection in use. It shows what is done and what is still open.
Is the test report an official verification certificate?
The test report itself is a test record the signing person is responsible for - no official verification. With ENTERPRISE & COMPLIANCE the app also prints the documents that follow a test: the calibration certificate of your lab along EURAMET cg-18 (standard, or accredited if your lab holds its own accreditation), the Placed in Service Report of a US registered service agency, the repair and test protocol for the German verification authority and the verification certificate of a private body in Austria, Spain, France, Italy, Belgium and Sweden. Each is the document of the lab, company or body that issues it: the app fills it in from the results, checks its completeness against the listed rules, numbers and seals it. The legal verification itself stays with the authority. Service documents in the manual.
Can I print calibration certificates for my customers?
Yes, with ENTERPRISE & COMPLIANCE. Calibrate any maker's scale along EURAMET cg-18 - the errors of indication with their expanded uncertainty, worked out on the UP↑SCALE - and issue the certificate of your lab: a standard certificate with your company data, or an accredited certificate if your lab holds an accreditation (your body, your number, your own symbol and your CMC; results outside the scope are marked *, and it stays pending until an authorised signatory signs it). Before it is issued, the app checks its completeness against ISO/IEC 17025 7.8 and the listed rules of the accreditation bodies - the content stays the responsibility of your lab. Every certificate goes into a register with its number; a correction is an amendment, never an overwrite. Pipette certificates (ISO 8655) take the same path. Certificates in the manual.
How can my customer check that the report was not changed?
With ENTERPRISE the report gets a running number from the scale and its seal (ECDSA). Your customer - or any auditor - drops the file on up-scales.com/check and sees that it is unchanged since you signed it, and which scale made it.
What do I need to test a customer's scale?
Your test weights, a tablet or laptop with the app, and the RS-232 adapter on the data port of the scale. The simple tests and their results on the screen are free, the extended tests need PRO; the final report with your name, signature and the seal needs ENTERPRISE.
Can I keep the test records of many customer scales on one adapter?
Yes. Save each scale as a scale profile (PRO 3, ENTERPRISE 50) with its data, and its test records stay with it. The equipment register keeps the interval and the due date, the test history stays on the scale with a trend chart.
What is the strict procedure?
One switch makes the test follow OIML R 76-1 Annex A as closely as a self-check can: the loads of the standard, preload, the legal display with the ΔL input at every row, repeatability with the number of weighings of the class, the warm-up time and the tolerance of your test weights - with a checklist in the report.
In detail
Also useful for you
Daily balance check (USP <41>)
Labs, quality & metrologyUSP <41> repeatability and minimum weight, Ph. Eur. 2.1.7, trade and HACCP checks in one minute a day.
Read →℮ prepackage control
Business & productionThe 3 packers' rules, the sample plan, T1 / T2 and the lot report, step by step.
Read →Owners of verified trade scales
Business & productionKeep your legal-for-trade scale exactly as it is - and add everything it never had. The adapter shows the exact weight of your scale and sends only what its keys do (tare, print) - or nothing at all.
Read →Tamper-evident sales records
Business & productionNumbered, chained, sealed and checked by the scale - for an inspection.
Read →Who else uses it
The same app, for other work
Every function is in the same app - at home, in business and in the lab. All functions at a glance.