UP↑SCALE DIY

⚖

BUILD YOUR OWN RS-232 SMART SCALE ADAPTER

For makers: two small boards from the big maker shops, four jumper wires - and the UP↑SCALE firmware turns the RS-232 port of your scale into a smart, wireless scale. Also your verified, legal-for-trade scale.

PARTS ABOUT 15 EUR
+ PRO FOR A YEAR 46.90 EUR
= ABOUT 62 EUR

NO SOLDERING WITH PRE-SOLDERED BOARDS

Is DIY the right way for you?
DIY is for makers: you buy the parts yourself, plug four jumper wires, install the firmware in your browser and set it up in the app. It takes about 30 minutes. We support the firmware and the app - not the hardware you bought (shops, wiring, broken boards).
You want it ready to use? Take the ESP32-C3 RS232 Adapter: one ready-made board with a DB9 plug (the ESP32-C3 RS232 Adapter, sold by TinyTronics), same firmware, same price in total.
Free and PRO work exactly like on the ESP32-C3 RS232 Adapter: the free version runs as long as you like, PRO (from 4.43 EUR a month, 46.90 EUR a year or 119.90 EUR once, incl. VAT; ENTERPRISE & COMPLIANCE from 13.00 EUR a month or 599.00 EUR once) unlocks everything - see FREE AND PRO.

⚖

SHOPPING LIST

What you need - and where to buy it

Prices and stock as we checked them on 20 October 2026 - shops change them, please check before you order. We get nothing from these shops: buy wherever you like, the part numbers are what matters.

#PartExactly thisPrice
1 Microcontroller board
(the "brain" with the radio)
Seeed Studio XIAO ESP32S3, pre-soldered
Seeed part no. 102010634 (Mouser: 713-102010634)
ESP32-S3, 8 MB flash, 8 MB PSRAM, USB-C, comes with a small antenna.
"Pre-soldered" = the pin headers are already on: no soldering. The version with loose headers needs them soldered (14 pins).
about 7-11 EUR
2 RS-232 board
(turns the 3.3 V signals of the board into the ±12 V of RS-232)
Waveshare RS232 Board (Waveshare SKU 3965)
SP3232 chip, works with 3.3 V, DB9 male plug, pin header with VCC, GND, RXD, TXD, CTS, RTS, comes with a 6-wire cable.
about 4-7 EUR
3 Jumper wires female-female ("Dupont"), 10-20 cm, at least 5. Any pack does it (often 40 wires for 2-4 EUR). The cable that comes with the RS-232 board may fit too - if both of its ends are sockets. about 2-4 EUR
4 USB-C cable + power A USB-C data cable (for the install from your computer) and a USB charger or power bank (for the scale). You probably have them. -
5 Maybe: DB9 null-modem adapter DB9 female to male, null-modem (also called "null modem gender changer"). Only needed if your scale's PC cable expects a computer - see connect your scale. Better buy it with the rest: it costs 3-6 EUR, and a second order costs more shipping. about 3-6 EUR
6 Optional: case UPCOMING: our free 3D file for the XIAO + the Waveshare board. Until then: a small project box, the RS-232 board has two M3 holes, the XIAO holds with double-sided tape. -

Total: about 13-15 EUR for the parts at the cheapest shops (up to about 22 EUR at others; plus shipping), + PRO when you want it (from 4.43 EUR a month, 46.90 EUR a year or 119.90 EUR once).

Where to buy
RegionXIAO ESP32S3Waveshare RS232 BoardNote
United Kingdom (also ships to the EU) The Pi Hut (about 7.30 GBP) The Pi Hut (about 3.90 GBP) everything from one shop, jumper wires too; choose the pre-soldered option if it is offered
Worldwide (USA, EU, UK, …) Digi-Key 102010634, pre-soldered (about 8.50 USD) no Waveshare board - instead the Artekit AK-3232 (about 9.40 USD), see other parts everything from one shop; jumper wires there: search "jumper wire female female"
EU, no soldering for sure Mouser 713-102010634 (about 7.30 EUR) welectron (Germany, about 4.25 EUR) two shops; Mouser ships free from a higher order value
Germany Eckstein (about 10.95 EUR), BerryBase welectron check whether the XIAO comes pre-soldered or with loose headers
USA Mouser, Seeed Studio, Digi-Key, Amazon PiShop.us (about 6.95 USD), Amazon, Waveshare (3.99 USD) see the alternative below if the Waveshare board is sold out
Worldwide Seeed Studio Waveshare direct from the makers, shipping from China
Other parts that work - also without soldering
The firmware runs on almost every ESP32-S3 or ESP32-C3 board with at least 4 MB flash - the update page installs the right version by itself.
  • Seeed XIAO ESP32C3, pre-soldered (Seeed part no. 102010633, about 5-6 EUR, e.g. The Pi Hut, BerryBase) - the cheapest one; single core, works the same for weighing. Same wiring as the XIAO ESP32S3.
  • Artekit AK-3232 (or AK-3232L with LEDs) instead of the Waveshare board: ST3232 chip, 3.3 V, DB9 female, wires go into its terminal block - at Digi-Key (about 9.40 USD). Its terminals are labelled differently from the Waveshare board, and its DB9 is a socket: check the Artekit guide for which terminal is which. Use one of its two channels (TX in, RX out) for TX/RX.
  • Boards with soldered pins (Espressif ESP32-S3-DevKitC-1 / ESP32-C3-DevKitM-1 and many others): choose CUSTOM in the app and enter the GPIO numbers you wired. Do not use TX/RX pins that a USB-serial chip on the board also uses (on many DevKits GPIO 43/44 on the S3, 20/21 on the C3) - use two free GPIOs instead.
S3 note: USB input. Take an ESP32-S3 board instead of a C3, and the adapter can also read a scale on its USB port: a USB scale (a USB serial port, a USB postal scale or a balance that types like a keyboard) or a cheap USB-to-RS-232 cable (CH340, CP210x or FTDI chip) - then you need no RS-232 board at all. Connect it with a USB OTG Y-cable that also takes power (one end into the board, one to the scale or cable, one to a charger or power bank: the board gives no power to the USB device by itself) and set the weight source to USB in the RS-232 settings; the app then connects by Bluetooth. A C3 can not do this: its USB port can only be a serial port to a computer (all USB ways).
Never use a 5 V RS-232 board (MAX232 without the "3", many "TTL to RS232" modules for Arduino Uno, the M5Stack Atomic RS232 Base): it puts 5 V on the RX pin of the ESP32, which only takes 3.3 V. It may work for a while - and then the board is broken.

⚖

YOU CAN SOLDER?

Then these parts work too

With a soldering iron you have more choice - useful when a part above is sold out, or in the USA, where the Waveshare board is not stocked everywhere. You solder pin headers (or the wires directly) to the board; everything else stays the same: the same firmware, the same app, the wiring by function (3V3, GND, TX, RX, optional RTS).

PartWhat to solderPrice / where
Microcontroller boards
Seeed XIAO ESP32S3 / ESP32C3 with loose headers 2 × 7 header pins (or only the 4-5 wires you need) a little cheaper than pre-soldered; same shops as above
Adafruit QT Py ESP32-S3 - 5426 (8 MB, no PSRAM) or 5700 (4 MB + 2 MB PSRAM) 4 wires to the pads TX, RX, 3V3, GND; board preset QT PY ESP32-S3 in the app (TX GPIO 5, RX GPIO 16). On the 5700 check its pinout page first - if its TX/RX pads have other GPIOs, choose CUSTOM. about 12-13 USD at Adafruit; The Pi Hut (5700, about 11.70 GBP), Digi-Key, Mouser. The 5426 is being discontinued.
Adafruit QT Py ESP32-C3 - 5405 4-5 wires to TX, RX, 3V3, GND (A0 for RTS); board preset QT PY ESP32-C3 Adafruit (out of stock when we checked), Digi-Key, The Pi Hut
RS-232 boards (3.3 V)
SparkFun RS232 Breakout - BOB-29197 a 9-pin header (or the wires) - it has a DB9 female socket and does the TX/RX crossover itself 9.95 USD at SparkFun, The Pi Hut - the US alternative to the Waveshare board
Adafruit RS232 Pal - 5987 (MAX3232E, 2 channels) the header pins, plus a DB9 plug of your own wired to it (pins 2, 3, 5) 3.95 USD at Adafruit, Core Electronics, The Pi Hut
SparkFun Transceiver Breakout - MAX3232 - BOB-11189 the header pins, plus a DB9 plug of your own about 7.30 USD at SparkFun, Electrokit

⚖

WIRING

4 wires (5 with the optional handshake)

XIAO ESP32S3 / C3 USB-C 3V3 GND D7 (RX) D6 (TX) D1 (RTS, opt.) Waveshare RS232 Board DB9 male 1 VCC 2 GND 3 RXD (from scale) 4 TXD (to scale) 6 RTS (opt.) 3.3 V - never 5 V
Waveshare header pinXIAO ESP32S3XIAO ESP32C3QT Py ESP32-S3QT Py ESP32-C3
1 VCC3V3 (never the 5V pin!)
2 GNDGND
3 RXD (data from the scale)D7 / RX (GPIO 44)D7 / RX (GPIO 20)RX (GPIO 16)RX (GPIO 20)
4 TXD (data to the scale)D6 / TX (GPIO 43)D6 / TX (GPIO 21)TX (GPIO 5)TX (GPIO 21)
5 CTSnot connected
6 RTS (optional)D1 (GPIO 2)D1 (GPIO 3)- (CUSTOM)A0 (GPIO 4)

⚖

INSTALL THE FIRMWARE

In your browser - about 5 minutes

You need: a computer (Windows, macOS, Linux or a Chromebook) with Chrome, Edge or Opera and a USB-C data cable (many charger cables carry no data). No driver, no program.

  1. Plug in the XIAO by USB-C (the RS-232 board may stay connected).
  2. Open the update page: up-scales.com/update/?scale=diy. The newest version is on top.
  3. Click INSTALL and choose the port of the board (often "USB JTAG/serial debug unit"; on Windows a COM port, on macOS/Linux usbmodem/ttyACM). The installer finds out by itself whether it is an S3 or a C3 and installs the right version.
  4. No port, or "failed to connect"? Download mode: unplug the XIAO, hold its BOOT button (the small "B"), plug it in, release BOOT. Then INSTALL again.
  5. Erase: on a new board you may tick it. Then Next and Install, and wait for "Installation complete" (about 1 minute).
  6. Start: press the RESET button ("R") or plug the board in again.
  7. Open the app (up-scales.com/app, Chrome, Edge or Opera; on the iPhone Safari with the free beacio extension, on the iPad the Bluefy browser) and click CONNECT: choose "UP↑SCALE (DIY) #...". No scale in the list? See app setup & help.

Problems with the install? The same tips as for the ESP32-C3 RS232 Adapter: IT DOES NOT WORK?

⚖

PINS IN THE APP

⚖

CONNECT YOUR SCALE

The Waveshare board has a DB9 male plug wired like a device (like a modem): pin 2 sends, pin 3 receives, pin 5 is ground, pin 8 is the optional RTS. That is the other way round than on a computer - and than on the 323.

  1. Your scale has a DB9 socket wired like a computer (it sends on pin 3): plug it in directly, or with a straight 1:1 extension cable.
  2. You use the scale's own PC cable (made to go into a computer): put the null-modem adapter (female to male) between the cable and the RS-232 board.
  3. Not sure? Try it directly first. If the auto-detect in the app says "no signal at all" although the interface of the scale is on, add the null-modem adapter.
  4. In the app: RS-232 SETTINGS → choose the maker of your scale (METTLER TOLEDO, KERN, OHAUS, A&D, ADAM, SARTORIUS, RADWAG, SHIMADZU, CAS, DINI ARGEO, RICE LAKE ... 20 presets) or press 🔍 AUTO-DETECT, then set the capacity and the decimals. On a verified scale also switch on EXACT WEIGHT (LISTEN ONLY only if it has no protective interface).
  5. Check: the weight in the app follows the display of the scale.
No weight in the app?
"No signal at all": switch on the interface of the scale in its menu (often "continuous output"; some scales only send with the print key). Then: null-modem adapter in or out (see above). Then: SWAP TX/RX in the app. Then: check the 4 wires and the pins in the app.
"Data, but unreadable": choose the preset of your scale, or set baud rate, data bits and parity by hand (see the manual of your scale).
Wrong values: check the preset, the decimals and the capacity in the RS-232 settings.
The app does not find the adapter: is the antenna of the XIAO plugged in? Press RESET, wait 5 seconds. Switch on Bluetooth in the settings of your phone or computer.

Your adapter in the app

The RS-232 setup with AUTO-DETECT, statistics of a series - and a filling machine over ESP-NOW with a cut-off that learns its lag.

The RS-232 scale setup of the adapter: weight source, scale type, hardware tare, listen only, exact weight, extra line of the scale, unit, d, capacity, baud rate, data format and the AUTO-DETECT button
Your RS-232 scale: set up once, or AUTO-DETECT
Statistics of 48 bags of gummies: mean 50.09 g, standard deviation, in perfect / OK / outside, Cp and Cpk, run chart and histogram
48 bags of gummies at a glance
The cut-off of the filling machine with the learned lag, slow down 15 percent before the target and a pause of 2 seconds - and the totals: 7 cavities of 20 g, every one a little above the target, plus 0.3 g on average
Never under: +0.3 g per cavity on average

More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.

Build your own adapter: questions and answers

What parts do I need to build an RS-232 scale adapter?

An ESP32-S3 or ESP32-C3 board (for example the Seeed XIAO ESP32S3, pre-soldered), a 3.3 V RS-232 board (for example the Waveshare RS232 Board with the SP3232 chip), a few female-female jumper wires and a USB-C cable with power - about 13-15 EUR for the parts.

Do I need to solder?

No, if you buy the boards pre-soldered: four jumper wires connect them. Boards with loose pin headers need them soldered.

Which ESP32 boards work with the firmware?

Almost every ESP32-S3 or ESP32-C3 board with at least 4 MB flash - the update page installs the right version by itself.

Do I need a null-modem adapter?

Only if the PC cable of your scale expects a computer on the other end. The DB9 null-modem adapter costs a few euros - buy it with the other parts to save shipping.

Is the DIY adapter cheaper than the ready-made board?

About the same in total. The ready-made ESP32-C3 RS232 Adapter (sold by TinyTronics) comes with a DB9 plug and runs the same firmware with the same FREE, PRO and ENTERPRISE versions; DIY is for makers who like to build it.

⚖

FREE, PRO AND UPDATES

⚖

CHECKLIST

  1. Ordered: XIAO ESP32S3 (pre-soldered), Waveshare RS232 Board, female-female jumper wires - maybe the null-modem adapter.
  2. Wired: VCC→3V3, GND→GND, RXD→D7, TXD→D6 (optional RTS→D1). Antenna on the XIAO.
  3. Firmware installed from the update page, board restarted.
  4. App connected to "UP↑SCALE (DIY)", RS-232 settings done, the weight follows the scale.
  5. Happy? Get PRO.

⚖

ANY MORE QUESTIONS?

Write us an e-mail at mail address, or contact us at instagram. More about the app: ↑⚖ APP MANUAL.

UP↑SCALE is not affiliated with Seeed Studio, Adafruit, SparkFun, Waveshare or the shops named here. Product names belong to their owners. You buy the parts from their sellers; we sell the software licence only. Building and using the adapter is your own responsibility.

Last updated · by Johann Anderson, FARM 23 SL

READY TO UP↑SCALE YOUR SCALE?

Start with the free version - the board costs under 15 EUR and you may never need more. If you do, unlock PRO from 4.43 EUR a month, 46.90 EUR a year or once for 119.90 EUR incl. VAT - or ENTERPRISE & COMPLIANCE from 13.00 EUR a month (once: 599.00 EUR). The lifetime licences are once and forever, no subscription needed; no advertisements, everything works offline, updates stay free.