UP↑SCALE › BUSINESS & PRODUCTION › FOOD PRODUCERS & PACKERS › ℮ PREPACKAGE CONTROL

The ℮ mark on packaging: prepackage control like the inspector does it

The ℮ mark on a prepackage says that its nominal quantity was filled and checked under the average-quantity system. If you fill packs with a nominal quantity, you are responsible for three rules - and the weights and measures office checks them with a sample plan. UP↑SCALE checks your lots the same way, on your own verified scale, and prints the lot report.

  • The 3 packers' rules, T1 and T2 from the TNE table
  • Check-weighing while you fill
  • Lot check with the sample plan: EU, OIML R 87, NIST HB 133
  • The lot report for the inspector

In short

UP↑SCALE is one scale app for the verified scale you already have, on an RS-232 adapter. For food producers and packers it guides the ℮ prepackage control: T1 and T2 from the TNE table, check-weighing while you fill, the lot check along 76/211/EEC, OIML R 87 or NIST HB 133 and the lot report. Check-weighing is free; the lot check and report need PRO, from 4.43 EUR a month.

What it saves you

0tables to look up: TNE, T1, T2 and the sample plan for your lot size are set
liveverdict while you weigh: accepted, rejected - or how many packs are still missing
gramsof overfill saved: the statistics show how close to the nominal quantity you can safely fill

The 3 packers' rules, explained

  1. The mean of the net contents of a lot must be at least the nominal quantity (Qn).
  2. Only a few packs - max. 2.5 % (FPackV: 2 %) - may contain less than T1 = Qn - TNE.
  3. No pack may contain less than T2 = Qn - 2 × TNE.

Example: 500 g honey - TNE 15 g, T1 485 g, T2 470 g.

Tolerable negative error: the TNE table FREE

Nominal quantityTNE
5 - 50 g9 %
50 - 100 g4.5 g
100 - 200 g4.5 %
200 - 300 g9 g
300 - 500 g3 %
500 g - 1 kg15 g
1 - 10 kg1.5 %

The % values are rounded up to 0.1 g. The table of the directive ends at 10 kg (OIML R 87 goes on: 150 g for 10 - 15 kg, 1 % above, with its own rounding). The app takes them from the nominal quantity you enter. Without the app: the free tolerable negative error calculator gives TNE, T1, T2 and the sample plan.

While you fill: check-weighing with the T1 and T2 weight tolerances FREEPRO

The ℮ button in the check-weighing setup asks for the nominal quantity and sets everything up: PERFECT from Qn up to Qn + TNE, OK from T1 up to Qn + 2 × TNE - every pack below T1 is red. Each pack goes into the statistics with the ℮ rules: mean, spread, Cp/Cpk, T1 and T2 as lines in the charts.

Coffee roasters and clubs have 🛍 FILL WEIGHING in their mode: bag by bag out of a bulk THING, with the ℮ rules, the live mean and the overfill - and FINISH moves the stock to the bag product. It is a filling aid, not the ℮ control: an open bag can still lose something before it is sealed. The lot check below is made afterwards with the closed packs.

The ℮ check in the app

Fill with the T1 and T2 marks in view, the statistics of the series and the verdict of the 3 rules for ℮ packs.

Fill weighing of 250 g coffee bags: 251.4 g, 100.6 percent, green, with the ℮ limits T1 and T2 above it
Filling 250 g bags: green at 251.4 g
Statistics of 48 bags of gummies: mean 50.09 g, standard deviation, in perfect / OK / outside, Cp and Cpk, run chart and histogram
48 bags of gummies at a glance
The prepackage control: the series meets the 3 rules for e packs
The ℮ check: all 3 rules met

More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.

The lot check with the sample plan: 76/211/EEC, FPackV, OIML R 87, NIST Handbook 133 PRO (report)

  1. Choose the rules: EU ℮ packs (76/211/EEC) or Germany: FPackV for all packs with a nominal quantity, international: OIML R 87:2016 - or USA: NIST Handbook 133 (see below).
  2. Enter the lot size (all packs of one filling: max. one hour of a filling line, otherwise max. 10,000 packs; OIML R 87: max. 100,000) and whether you open the packs (destructive test).
  3. The app shows the sample plan - EU and FPackV: the reference method of 76/211/EEC annex II, a double plan: e.g. 30 packs for 100-500, accepted with 1 below T1, rejected with 3; with 2, weigh 30 more (in all 60: accepted up to 4, rejected from 5). 50 packs up to 3,200, 80 above. Opened packs: 20, only for lots from 100. OIML R 87: one sample from its Table 2 / Annex I (e.g. 49 packs of a lot of 100, 98 from 600).
  4. Take the sample at random and weigh the packs in the order drawn. The verdict checks: mean + k × s ≥ Qn (a sample mean may be a little below Qn - by k × s, the uncertainty of a sample; OIML: the sample correction factor SCF), the packs below T1, none below T2.
  5. You see ✓ LOT ACCEPTED, ✗ LOT REJECTED (as soon as it can't pass any more) or how many packs are still missing. Lots under 100 packs are checked pack by pack.

German special case: the drained weight of handmade packs or naturally grown food (§ 10 (3) FPackV) - no pack below Qn - 3 × TNE.

Packing for the USA? The same box checks your lots along NIST Handbook 133 (Category A): packs labeled by weight, count or volume, one limit per pack - the MAV - instead of T1 / T2, the sample plan of Table 2-1 (12, 24 or 48 packs), the average within the sample error limit, moisture allowances (e.g. flour or cannabis 3 %) and the tare sample. The label carries the nominal quantity without the ℮, and the scale needs an NTEP certificate. How it works in the manual

The lot report PRO

  • your company header, the product and the lot number
  • nominal quantity, the rules, TNE, T1 and T2, the lot size and the sample plan
  • the scale with its firmware and calibration date - with the RS-232 adapter a boxed line "weighed on a verified scale, in listen-only plus exact-weight mode"
  • the results with ✓ / ✗, the verdict, every value of the sample (below T1 or T2 marked) and a line for the signature
  • print, PDF or HTML and CSV (PRO); numbered and sealed by the scale, checkable by anybody (ENTERPRISE)

Compared with the usual ways

Paper + calculatorPrepackage app (subscription)UP↑SCALE
Weights into the checkby handserial adapter + PC / tabletfrom your verified scale, wireless
Sample plan and verdictlooked upyesyes, live
Also check-weighing, labels, recipes, stocknonoyes, same app
Costs over 5 yearsyour time270-290 EURabout 133 EUR (PRO once)

List prices of common products, October 2026, rounded.

The limits - honestly

  • For ℮ packs you need a verified scale: the 420 and 710 are not verified - with them, report and app say so. Use the RS-232 adapter on your verified scale (how).
  • Your own check - not an official certificate. Inspectors take the spread into account: fill with a safe distance to Qn.
  • Check the rules of your country (in the USA: an NTEP scale, see NIST Handbook 133).

For food producers & packers →

℮ mark and prepackage control: questions and answers

What does the ℮ (e mark) mean on food packaging?

The ℮ (estimated sign) says that the pack was filled along the EU directive 76/211/EEC: the packer is responsible that a lot meets three rules - the mean reaches the nominal quantity, only a few packs are below T1, none below T2 - and checks it with a sample plan.

What are the 3 packers' rules?

The three rules every packer of ℮ packs is responsible for: 1. the mean of the net contents of a lot is at least the nominal quantity (Qn); 2. at most 2.5 % of the packs (German FPackV: 2 %) contain less than T1 = Qn - TNE; 3. no pack contains less than T2 = Qn - 2 × TNE. Example: 500 g honey - TNE 15 g, T1 485 g, T2 470 g. The weights and measures office checks them with a sample plan.

How do I calculate T1 and T2?

Take the tolerable negative error (TNE) for your nominal quantity from the TNE table: T1 = nominal - TNE, T2 = nominal - 2 × TNE. For 1 kg the TNE is 15 g, so T1 = 985 g and T2 = 970 g; for 100-200 g and 300-500 g it is a percentage (4.5 % and 3 %, rounded up to 0.1 g). The app does it from the nominal quantity you enter - and so does the free TNE calculator.

What is the tolerable negative error for a 250 g pack?

9 g (packs of 200-300 g). So T1 = 241 g and T2 = 232 g. For 500 g it is 15 g (T1 485 g, T2 470 g), for 1 kg 15 g too; the app takes the TNE from the nominal quantity you enter. Tolerable negative error calculator.

How many packs do I have to weigh for an ℮ check?

It depends on the lot size. The double plan of 76/211/EEC annex II (also used with the FPackV): 30 packs for 100-500 packs, 50 up to 3,200 and 80 above - and as many again when the first sample lies between acceptance and rejection. Lots under 100 packs are checked pack by pack; opened packs: 20 from 100 packs. OIML R 87:2016: e.g. 49 packs for a lot of 100, 98 from 600. The app shows the plan for your lot.

Does UP↑SCALE check prepackages along OIML R 87?

Yes. Choose the rules International: OIML R 87:2016 (Quantity of product in prepackages): the app uses its table of the tolerable deficiency T (also above 10 kg), the three rules - mean ≥ nominal, at most 2.5 % with a T1 error, none with a T2 error - and for the lot check the sample plan of Table 2 / Annex I with the sample correction factor SCF (e.g. 49 packs for a lot of 100, 98 from 600). Your own check before the inspector comes, not an official inspection.

Which sample plan does the EU lot check use?

The reference method of directive 76/211/EEC, annex II: a double sampling plan for packs that are not opened (30, 50 or 80 packs, a 2nd sample of the same size when the first lies between acceptance and rejection), the mean criterion on 30 or 50 packs (k = 0.503 / 0.379) and 20 packs for destructive tests from 100 packs. The UP↑SCALE works out the plan and the verdict.

Must the mean of the sample reach the nominal quantity?

Almost: the lot check is mean + k × s ≥ Qn, so the sample mean may be a little below Qn - by k × s, the uncertainty of a sample (76/211/EEC: k = 0.503 for 30 packs, 0.379 for 50). But a big spread puts more packs below T1 and T2, and those rules reject a lot quickly. Fill with a safe distance to Qn - the statistics show how close you can go.

What is the difference between the EU rules and the German FPackV?

The FPackV applies to all packs with a nominal quantity, not only ℮ packs, and allows 2 % of the packs below T1 instead of 2.5 %. The sample plan of the lot check is the one of 76/211/EEC; the app has both rules - and OIML R 87:2016 for other countries.

Does the app check US packages along NIST Handbook 133?

Yes, Category A: packs labeled by weight, count or volume, the MAV per pack instead of T1 / T2, the sample plan of Table 2-1 (12, 24 or 48 packs), moisture allowances (e.g. flour or cannabis 3 %) and the tare sample. The scale needs an NTEP certificate.

What is the maximum allowable variation (MAV) in NIST Handbook 133?

The one limit per pack of the US package check, from Table 2-5 of NIST Handbook 133 - instead of T1 and T2. A pack more than the MAV below its labeled quantity is an unreasonable minus error; the MAV is e.g. 12.7 g for 227 g and 11/16 oz for 16 oz. The table has its own column for g, oz and lb: you choose the unit of your label, and the charts show the MAV as a line.

Is fill weighing the same as the ℮ control?

No. Fill weighing watches the open bags while you fill - an open bag can still lose something before it is sealed. The ℮ lot check is made afterwards with the closed packs, with its lot report.

Can I check ℮ packs with any scale?

No - you need a verified scale. The UP↑SCALE 420 and 710 are not verified, and report and app say so. Plug the RS-232 adapter into your verified scale; it is your own check, not an official certificate.

Also useful for you

Who else uses it

Food producers & packers

Business & production

Fill, check and label your packs on the scale you already have - with the statistics and the ℮ lot report the inspector wants to see.

Read →

Labs, quality & metrology

Labs, quality & metrology

Records you can prove for regulated work: users and roles, a hash-chained audit trail, e-signatures, sealed reports, routine checks and a validation pack.

Read →

Manufacturers & workshops

Business & production

Count parts on several scales, sort by weight, fill molds and drive your filling machine with a cut-off that learns.

Read →

Bakeries & pastry shops

Business & production

Recipes weighed step by step across two scales, baker's percentage and true hydration, costs per batch and labels with allergens.

Read →

Gelato & ice cream shops

Business & production

Every mix balanced while you plan it - sweetness, anti-freezing power, solids, serving temperature - weighed step by step, with costs per kg and allergen labels.

Read →

Coffee roasters

Business & production

The ROASTERY ☕ MODE: green coffee in, roast loss of every batch, batch trace to the green lot, blends, coffee tax month - fill weighing of the bags with live statistics (no overfilling to be safe), the ℮ report of the closed bags, labels and a coffee scale with flow rate.

Read →

Owners of verified trade scales

Business & production

Keep your legal-for-trade scale exactly as it is - and add everything it never had. The adapter shows the exact weight of your scale and sends only what its keys do (tare, print) - or nothing at all.

Read →

Auditors & QA teams

Labs, quality & metrology

Check the records of many scales in minutes instead of days: every file checks itself, the reviews and signatures are in the records, and the documents for the binder come out of the app.

Read →

Service technicians & inspectors

Labs, quality & metrology

The tests of OIML R 76-1 Annex A or NIST HB 44 at the scale, EURAMET cg-18 calibrations with the certificate of your lab, service documents after a repair - recorded while you test, numbered and sealed.

Read →

Labels & printing

Business & production

Price, QR and allergen labels from your scale: as a picture for free, on any printer or label printer with PRO.

Read →

The same app, for other work

Every function is in the same app - at home, in business and in the lab. All functions at a glance.

Last updated · by Johann Anderson, FARM 23 SL

READY TO UP↑SCALE YOUR SCALE?

Start with the free version - the board costs under 15 EUR and you may never need more. If you do, unlock PRO from 4.43 EUR a month, 46.90 EUR a year or once for 119.90 EUR incl. VAT - or ENTERPRISE & COMPLIANCE from 13.00 EUR a month (once: 599.00 EUR). The lifetime licences are once and forever, no subscription needed; no advertisements, everything works offline, updates stay free.