UP↑SCALE › LABS, QUALITY & METROLOGY › LABORATORIES & PHARMACIES › DAILY BALANCE CHECK (USP <41>)
The daily balance and scale check - in one minute, on record
A routine check (the daily check before use) weighs a known test weight to confirm that a balance still weighs correctly before work starts. Every quality system asks for it, and in most places it is still a pen, a logbook and a test weight. The routine check before use in UP↑SCALE does the counting, the maths and the record for you - and makes sure nobody works on with a scale that failed.
- USP <41> and Ph. Eur. 2.1.7 profiles, minimum weight
- Quick checks for trade and HACCP
- Every value taken by itself, PASS or FAIL
- A log of every check, due dates on every device
In short
UP↑SCALE is one scale app for the balance or scale you already have. Its routine check takes every value of your test weight by itself and says PASS or FAIL against USP <41>, Ph. Eur. 2.1.7, trade or HACCP limits - in one minute a day, with a log. For labs, pharmacies and kitchens. The routine check is free; ENTERPRISE (from 13.00 EUR a month) adds users and the sealed log.
What it saves you
How the daily balance check works FREE+ ENTERPRISE
- Open the ☑ TEST page - the routine check is the first block. Choose your profile once and enter your reference weight(s).
- Put the weight on as many times as the profile asks - the UP↑SCALE takes every value as soon as it is stable (or with ✓ TAKE NOW) and judges the check itself; each value counts minus the empty plate before it.
- You get PASS or FAIL with the numbers behind it.
- FAIL? A red bar on the weighing page and the test page warns until a re-test passes. It warns, it never blocks. Removing the warning without a re-test needs a reason (and, with users, an ADMIN) - and goes into the log.
- The result goes into the log of the browser and - with firmware that knows it - into the scale: interval, last pass, last check, open failure. Every device that connects sees it, and asks once per connection when a check is due.
- With ENTERPRISE: the whole log as a sealed PDF - period, passed / failed, failures followed by a pass or a removed warning, missed intervals. ENTERPRISE
The routine check in the app
Eleven weighings, the statistics and PASS - and the check stays in the activity log of the scale with user and time.


More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.
The profiles: USP <41>, Ph. Eur. 2.1.7, trade, HACCP - no one rule for every kind of work
| Profile | What is weighed | PASS when |
|---|---|---|
| Quick check kitchen, food, HACCP | one reference weight 3 times in the middle | the mean is within your tolerance (default 1 % of the weight, at least 2 d - set what your HACCP plan asks for) |
| Trade OIML R 76, in use | one weight (optional a second) 3 times, 6 times for classes I / II | every value is within 2 × the maximum permissible error of the class of your scale |
| Industry QA two weights | a small weight 10 times (repeatability), a big one (≥ 5 % of Max) once (sensitivity) | within the limits of your process (default 0.10 %) |
| Lab: USP <41> | one weight 10 times + one weighing of a weight ≥ 5 % of Max | 2 × s / smallest net weight ≤ 0.10 % (s below 0.41 d counts as 0.41 d); accuracy ≤ 0.10 % |
| Lab: Ph. Eur. 2.1.7 | one weight of 100 mg to 5 % of Max 10 times + one weighing of a weight ≥ 5 % of Max | repeatability as USP; sensitivity ≤ 0.05 % |
| Custom your SOP | 3 to 30 weighings, one or two weights | your own limits |
The lab profiles also show the minimum weight of your balance (2000 × s): below it, the pharmacopoeias say the balance is not good enough for your weighings. Neither pharmacopoeia asks for this test every day - how often is set by your own risk assessment.
Manual: routine check
What the balance check log holds
- date and time, profile, reference weight(s), every single value, mean, standard deviation, the limits and the result
- with users: who did it - and who removed a warning, with the reason
- in the test history of the scale (ENTERPRISE): the result as a record of its own, with the trend of all tests
- on the scale (all editions): interval, last pass, last check, last result, open failure - the same for every device
Checklist for your balance check SOP
- Choose the profile that fits your work (and your auditor) - and write it into your procedure
- Use a test weight of a known class (e.g. OIML R 111) - its tolerance should be small against your limit
- Set the interval on the scale: every day, every shift, before every series
- Decide who may remove a warning (with users: ADMIN only)
- Save the sealed PDF of the log at the end of every period (ENTERPRISE)
- Once a year (or by your interval): the full scale test suite or a calibration
Compared with a logbook and a calculator
| Logbook + calculator | UP↑SCALE | |
|---|---|---|
| Taking the values | read and write them down | taken by itself when stable |
| Standard deviation, minimum weight | calculator or spreadsheet | worked out, with the rule shown |
| A failed check | a note in the book | a warning on every device until a re-test passes |
| Due checks | memory, a calendar | the scale knows the interval |
| For the audit | a book with handwriting | a sealed PDF of the period (ENTERPRISE) |
What it saves in hours and subscriptions for a whole lab: the cost table of the QA guide.
The limits - honestly
- The routine check runs "as used" (the shown weight, the filters of the scale) - it is no calibration and no verification
- The values of the pharmacopoeias come from their texts as we read them - check them against the official chapters of your edition
- The app follows USP <41> / Ph. Eur. 2.1.7; it makes no claim that a check is "required" or "compliant" - your procedure decides
Daily balance check: questions and answers
How do I check a balance before use?
Put a known test weight on a few times. The routine check of UP↑SCALE takes every value by itself as soon as it is stable, works out the mean and the standard deviation and says PASS or FAIL against the limits of your profile - in about a minute, with the record saved.
What does USP <41> require for a balance?
Repeatability: one weight 10 times, 2 × standard deviation / smallest net weight ≤ 0.10 % (a standard deviation below 0.41 d counts as 0.41 d). Accuracy: a weight of at least 5 % of Max within 0.10 %. Check the values against the official chapter of your edition.
What is the difference between USP <41> and Ph. Eur. 2.1.7?
The repeatability criterion is the same, but Ph. Eur. 2.1.7 takes a test weight of at most 5 % of Max and at least 100 mg for it. Ph. Eur. 2.1.7 tests the sensitivity with a limit of 0.05 %, where USP <41> tests the accuracy with 0.10 %. The app has a profile for each.
How often should a balance be checked and documented?
That is set by your own risk assessment and SOP - neither pharmacopoeia asks for this test every day. Set the interval on the scale (every day, every shift, before every series) and every device asks when the check is due.
How do I calculate the minimum weight of a balance (USP <41>)?
Minimum weight = 2000 × the standard deviation of the repeatability test - e.g. s = 0.1 mg gives a minimum weight of 200 mg. The lab profiles show it after every check: below it, the pharmacopoeias say the balance is not good enough for your weighing. Free USP <41> minimum weight calculator.
How do I do a balance repeatability test?
Weigh the same test weight several times and take the standard deviation s of the values - 10 times in the USP <41>, Ph. Eur. 2.1.7 and Industry QA profiles. The routine check takes every value by itself (each one minus the empty plate before it) and works out the mean, s and the minimum weight; for USP <41> the repeatability is met when 2 × s / the smallest net weight is at most 0.10 %.
What is a balance sensitivity test?
One weighing of a weight of at least 5 % of Max, compared with its value. Ph. Eur. 2.1.7 calls it sensitivity and allows 0.05 %; USP <41> calls the same weighing accuracy and allows 0.10 %. The Industry QA profile has it too, with the limit of your process (default 0.10 %).
What happens when the daily check fails?
A red bar warns on the weighing page and the test page of every connected device until a re-test passes. It warns, it never blocks. Removing the warning without a re-test needs a reason (with users: an ADMIN) and goes into the log.
Which test weight do I need?
A weight of a known class, e.g. OIML R 111, whose tolerance is small against your limit. For the USP and Ph. Eur. profiles one weight for the repeatability and one of at least 5 % of Max.
Is a daily balance check a calibration?
No. The routine check runs "as used" - the shown weight with the filters of the scale - and is no calibration and no verification. Once a year (or at your interval) run the full test suite or a calibration.
How do I know if my scale is still accurate?
Put a known test weight on it a few times and compare. The routine check does that before use: it takes every value when stable and says PASS or FAIL against the limit of your profile; a failed check offers CALIBRATE NOW and warns on every device until a re-test passes. The full scale test suite goes further: corners, loads up and down, repeatability.
Do I still need a logbook for the daily balance check?
The app keeps the log for you: date and time, profile, reference weight(s), every single value, the result and - with users - who did it; the scale keeps the interval, the last pass and an open failure. With ENTERPRISE the log is exported as CSV / JSON or as a sealed PDF of the period. Whether it replaces your paper logbook is decided by your procedure.
How do I check a kitchen scale for HACCP?
Use the Quick check profile: one reference weight 3 times in the middle; PASS when the mean is within your tolerance (by default 1 % of the weight, at least 2 d - set what your HACCP plan asks for). The log keeps every check.
Also useful for you
USP <41> minimum weight
Repeatability, minimum weight (2000 s) and accuracy of your balance from your weighings.
Read →Scale calibration & tests
Labs, quality & metrologyEccentricity, linearity, repeatability and every other test of OIML R 76-1 Annex A at the scale, with checklist and final report.
Read →LIMS, ELN & sensors
Labs, quality & metrologyEvery weighing to your LIMS or ELN, room values next to it, air buoyancy corrected.
Read →Who else uses it
Laboratories & pharmacies
Labs, quality & metrologyThe compounding assistant from master formula to signed batch record, routine checks before use, a full test suite and records you can prove: users, roles, reasons, a hash-chained audit trail and sealed reports.
Read →Home & kitchen
Home & kitchenThe free Bluetooth kitchen scale app for the scale you already have: nutrition, carbs, recipes, baking, coffee and cocktails - offline, no account.
Read →Business & production
Business & productionWeighing scale software for shops, packers, kitchens and workshops: weigh, price, label, count, check and book on the scale you have - pay once.
Read →Food producers & packers
Business & productionFill, check and label your packs on the scale you already have - with the statistics and the ℮ lot report the inspector wants to see.
Read →Manufacturers & workshops
Business & productionCount parts on several scales, sort by weight, fill molds and drive your filling machine with a cut-off that learns.
Read →Bakeries & pastry shops
Business & productionRecipes weighed step by step across two scales, baker's percentage and true hydration, costs per batch and labels with allergens.
Read →Gelato & ice cream shops
Business & productionEvery mix balanced while you plan it - sweetness, anti-freezing power, solids, serving temperature - weighed step by step, with costs per kg and allergen labels.
Read →Restaurants & commercial kitchens
Business & productionStandard recipes, portion costs, allergens and batch cooking - every cook gets the same result, and the daily check fits your HACCP plan.
Read →Shops, market stalls & farm shops
Business & productionWeigh, price, label and book in one step. The sales log lives on the scale - by day, product and user.
Read →Entrepreneurs & start-ups
Business & productionOne device for 40+ jobs, start for under 15 EUR, pay once when it pays off - and grow to more scales and more phones without a new system.
Read →Auditors & QA teams
Labs, quality & metrologyCheck the records of many scales in minutes instead of days: every file checks itself, the reviews and signatures are in the records, and the documents for the binder come out of the app.
Read →Service technicians & inspectors
Labs, quality & metrologyThe tests of OIML R 76-1 Annex A or NIST HB 44 at the scale, EURAMET cg-18 calibrations with the certificate of your lab, service documents after a repair - recorded while you test, numbered and sealed.
Read →Compounding assistant
Labs, quality & metrologyThe formula step by step on your balance: every component within its tolerance, the container checked, signed records.
Read →Calculation validation (IQ/OQ)
Labs, quality & metrologyReference cases worked out by hand from the standards, computed by the scale firmware, with a sealed record.
Read →Lab & pharmacy: more pages
The same app, for other work
Every function is in the same app - at home, in business and in the lab. All functions at a glance.