UP↑SCALE › BUSINESS & PRODUCTION › OWNERS OF VERIFIED TRADE SCALES

Your verified scale + our app = ℮, labels, statistics

UP↑SCALE connects a verified scale through its RS-232 port to a scale app for ℮ prepackages, labels and statistics - the scale stays the legal reading. You sell by weight or pack ℮ prepackages? Then you need a verified, legal-for-trade scale - and you probably have one already. Plug our RS-232 adapter into it, and your scale stays exactly what it is: it only gains the whole app.

  • Only the keys of your scale - or LISTEN ONLY
  • EXACT WEIGHT with the stable mark of your scale
  • The alibi number on your label
  • LEGAL MODE: an alibi memory for balances without one

In short

UP↑SCALE is one scale app for the verified trade scale you already have. The RS-232 adapter keeps the scale as it is: it shows its exact weight and sends only what its keys do, or nothing. You add labels with the alibi number and a test suite; the display of your scale stays the legal reading. The board costs about 13.50 EUR, the app is free; PRO from 4.43 EUR a month.

Keep the scale you trust - add everything it never had

2Only the keys of your scale - LISTEN ONLY if it has no protective interface FREE

Almost every verified scale has a protective interface (German: rückwirkungsfreie Schnittstelle): over its data port it takes only what its keys do too - ask for the weight, tare, print - and nothing sent there can change its weighing result or its legal settings (see the manual of your scale). The adapter sends only such commands: never an adjustment, a setting, a unit or a preset tare. That is the normal setup, and the TARE of the app then tares the scale itself (hardware tare) - also for ALIBI ON TAKE and LEGAL MODE with the tare of the balance.

Your scale has no protective interface? Only then you need LISTEN ONLY: the adapter only reads the data from the serial port of your scale and never sends anything to it - no weight requests, no tare signals (set the scale to continuous output; the app uses its software tare).

3EXACT WEIGHT: the value of your scale FREE

With EXACT WEIGHT the app shows exactly the weight your scale sends - no averages, no lock, no zero tracking of ours - and takes the scale's own stable mark (METTLER TOLEDO, KERN, A&D, ADAM, OHAUS ...). What your scale shows, the app shows (minus a tare you set in the app). Containers and virtual weights of the app are switched off: the weight of the verified scale is never changed by the app.

A big second screen: switch it on in the settings and the app shows the marks for NET / GROSS, tare, zero and stable, and a fullscreen indicator view - for your staff, the packing table or the back room. It is no verified display: when you sell to customers, they must see the display of the verified scale itself (or a verified customer display of its maker).

4EXTRA LINE: the alibi number on your label FREE

If your scale prints an extra line with its print key (e.g. the alibi number of a verified scale), tell the app how the line starts: it is not read as a weight (a line that starts with "Alibi" never is). Each alibi number belongs to one weighing - the weight on the scale when it was printed: it goes on your labels with the placeholder [scaleline], into the log and the statistics, and the UP↑SCALE keeps it with every checked sale or booking (inside the hash chain of the sales log), every bag of fill weighing and every ingredient of a compounding batch - only for the weight it was printed at, never the number of another weighing. It only reads - so it works with LISTEN ONLY too. ALIBI ON TAKE goes one step further: the UP↑SCALE presses the print key of the balance itself at every take (a sale, a bag, an ingredient, a log line, a label) - with the print command of the preset or your own, so LISTEN ONLY stays off for it; READ BALANCE ID takes its serial number into the scale data.

6Every scale, from micrograms to tons FREE

You type in the step d of your scale and its Max, like the data plate says - from 0.1 µg balances to weighbridges, with multi-interval and multiple-range scales of up to 3 ranges. 17 presets (METTLER TOLEDO, KERN, OHAUS, A&D, ADAM, SARTORIUS, RADWAG, SHIMADZU, CAS, DINI ARGEO, RICE LAKE, TOLEDO CONTINUOUS, YAOHUA, SMA, NCI ...), or the automatic detection of baud rate and format. One adapter for several scales? Save each one as a scale profile (PRO 3, ENTERPRISE 50).

7Test your verified scale - before the inspector does FREE+ ENTERPRISE

The test suite runs the tests of OIML R 76-1 Annex A on your scale: repeatability, eccentricity, accuracy and linearity, tare, zero-setting and more - judged against the limits of your accuracy class. A failed verification appointment costs the call-out and a second visit: test first, fix the obvious, call when the scale is ready. And check a used scale before you buy it.

Tips from the practice

  • Switch on the interface of your scale in its menu - many need "continuous output", some send only with the print key.
  • EXACT WEIGHT for every verified scale: the app never changes its value. LISTEN ONLY only if your scale has no protective interface (rückwirkungsfreie Schnittstelle) - almost every verified scale has one, and then the app may tare the scale and press its print key.
  • Tare on the scale, not with the software tare of the app, when the tare must be legal: with the key of the scale or with the hardware tare (the TARE of the app sends the tare command of the scale). The scale then sends the net weight, the app shows it.
  • The weight in the app freezes (– – –) as soon as the data of the scale stop - nothing is booked from an old value (heartbeat lock, ENTERPRISE & COMPLIANCE; FREE and PRO freeze when the connection is lost).

Statistics and ℮ checks in the app

What your verified scale gets on top: statistics with Cp/Cpk for a series, the ℮ check with its 3 rules and fill weighing with the T1/T2 marks - the display of your scale stays the legal reading.

Statistics of 48 bags of gummies: mean 50.09 g, standard deviation, in perfect / OK / outside, Cp and Cpk, run chart and histogram
48 bags of gummies at a glance
The prepackage control: the series meets the 3 rules for e packs
The ℮ check: all 3 rules met
Fill weighing of 250 g coffee bags: 251.4 g, 100.6 percent, green, with the ℮ limits T1 and T2 above it
Filling 250 g bags: green at 251.4 g

More about the app, with all screenshots →Screenshots of the real app with demo values - a screenshot may show the look of an older app version.

Verified scales and the app: questions and answers

Can I connect my verified scale to an app without changing the scale?

Yes. The UP↑SCALE adapter plugs into the RS-232 data port. Almost every verified scale has a protective interface there (German: rückwirkungsfreie Schnittstelle): the adapter sends only what the keys of the scale do (weight request, tare, print) - never an adjustment or a setting. Only a scale without one needs LISTEN ONLY: then the adapter only reads what the scale sends - never a byte back. Verification offices warn that connecting a system after the verification can end it, so ask your office before you use the setup in trade; the page has a sample mail for that.

Which verified scales work with the adapter?

Most bench, counter and trade scales with an RS-232 port: 17 presets (METTLER TOLEDO, KERN, OHAUS, A&D, ADAM, SARTORIUS, RADWAG, SHIMADZU, CAS, DINI ARGEO, RICE LAKE ...) or the automatic detection of baud rate and format. From 0.1 µg balances to weighbridges, multi-interval and multiple-range scales with up to 3 ranges included. Model by model: every scale.

Does the app change the weight of my verified scale?

No. With EXACT WEIGHT the app shows exactly the value the scale sends, with the scale's own stable mark - no averages, no zero tracking, and containers and virtual weights of the app are switched off. The display of your verified scale stays the legal reading.

Can I print labels with the weight of my verified scale?

Labels without a measured weight are no problem: the nominal quantity of ℮ packs, lot numbers, dates, ingredients. Labels with a measured weight or price are legally relevant: PC software can be allowed if a verified alibi memory keeps every result and its number is on the label (EXTRA LINE: each number only with the weight it was printed at) - ask your verification office first. At the counter the price must come from the verified scale, not from a label of the app.

My verified balance has no alibi memory. Can the adapter keep the values?

Yes: 🔏 LEGAL MODE (ENTERPRISE) stores every value that is used first - with the line of the balance exactly as it came and its own number (UP-000123) - and only then the value goes into the record. Kept at least 3 months, sealed and checkable on up-scales.com/check. It works with the tare of the balance or, on a scale without a protective interface, with LISTEN ONLY (software tare, stored with the line). Where the law demands an approved alibi memory, your verification office decides until its certificate (planned for our 232 UP↑SCALER).

Is the app a verified second display or customer display?

No. The indicator view with NET / GROSS, tare, zero and stable marks is for your staff, the packing table or the back room. When you sell to customers they must see the display of the verified scale itself, or a verified customer display of its maker.

What does an RS-232 interface with software for a verified scale cost?

The interfaces scale makers sell (USB, network, wireless) cost 150-440 EUR and come without software. Our adapter board costs about 13.50 EUR, the app is included and free; PRO costs 119.90 EUR once or from 4.43 EUR a month.

How do I test my verified scale before the inspector comes?

Run the test suite along OIML R 76-1 Annex A: repeatability, eccentricity, accuracy and linearity, tare, zero-setting and more, judged against the limits of your accuracy class. All tests and the results on the screen are free. Test first, fix the obvious, then call - a failed appointment costs a second visit.

Does the adapter have an NTEP certificate (USA)?

No. In the USA a scale in trade needs an NTEP certificate (or a state type approval) and is registered with the weights and measures office. The app and the adapter have none: the NTEP scale and its display stay the device for the sale, the app does the records around it. The weights for Metrc come from the NTEP scale as well: the METRC (DISPENSARY) MODE takes them through the adapter and writes the CSV files for the Metrc upload. More: Metrc scale for dispensaries.

Also useful for you

Who else uses it

Shops & trade: more pages

The same app, for other work

Every function is in the same app - at home, in business and in the lab. All functions at a glance.

Last updated · by Johann Anderson, FARM 23 SL

READY TO UP↑SCALE YOUR SCALE?

Start with the free version - the board costs under 15 EUR and you may never need more. If you do, unlock PRO from 4.43 EUR a month, 46.90 EUR a year or once for 119.90 EUR incl. VAT - or ENTERPRISE & COMPLIANCE from 13.00 EUR a month (once: 599.00 EUR). The lifetime licences are once and forever, no subscription needed; no advertisements, everything works offline, updates stay free.