UP↑SCALE › FREE CALCULATORS › ℮ CALCULATOR: TNE, T1, T2

℮ calculator: TNE, T1, T2 and the sample plan

This free UP↑SCALE calculator gives the tolerable negative error (TNE), T1, T2 and the sample plan for ℮ prepackages - in your browser, with no sign-up. Type in the nominal quantity of your pack: you get the tolerable negative error and the limits T1 and T2. Add the lot size for the sample plan - and paste the net weights of your sample to check the lot like the inspector does.

How it is calculated

The three rules of the packer (EU directive 76/211/EEC, in Germany the FPackV; OIML R 87:2016 has the same three rules with its own table of the tolerable deficiency T):

1. mean of the lot ≥ Qn (for a sample: mean + k × s ≥ Qn) 2. at most 2.5 % of the packs below T1 = Qn - TNE (FPackV: 2 %) 3. no pack below T2 = Qn - 2 × TNE

Nominal quantityTNE
5 - 50 g / ml9 %
50 - 1004.5 g / ml
100 - 2004.5 %
200 - 3009 g / ml
300 - 5003 %
500 - 1,00015 g / ml
1 - 10 kg / l1.5 %
10 - 15 kg / l (OIML R 87 only)150 g / ml
above 15 kg / l (OIML R 87 only)1 %

The % values are rounded up to the next 0.1 g or ml. The table of 76/211/EEC (and the FPackV) covers 5 g to 10 kg; OIML R 87:2016 goes on above 10 kg, has no lowest nominal quantity and rounds the % values above 1,000 g up to the next whole g or ml.

Sample plans of 76/211/EEC annex II (EU and FPackV), packs not opened - a double plan: weigh the 1st sample; if the packs below T1 lie between acceptance and rejection, weigh a 2nd sample of the same size and count both together.

Packs in the lot1st sampleaccepted up to / rejected from2nd sample (in all)accepted up to / rejected fromMean criterion
100 - 500301 / 330 (60)4 / 530 packs, k = 0.503
501 - 3,200502 / 550 (100)6 / 750 packs, k = 0.379
3,201 and over803 / 780 (160)8 / 950 of the packs, k = 0.379

Lots under 100 packs are checked pack by pack. Opened packs (destructive test): 20 packs, accepted up to 1, rejected from 2, mean criterion k = 0.640 - only for lots of 100 packs or more. The mean criterion: mean + k × s ≥ Qn (k = t / √n with t of the Student distribution at 0.995). OIML R 87:2016: one sample for every lot from Table 2 / Annex I (e.g. 49 packs of a lot of 100 with 2 allowed below T1, 81 of 500 with 4, 98 from 600 with 5), and the sample correction factor SCF instead of k; 20 packs or fewer: every pack.

Example: 250 g pack: TNE 9 g, T1 = 241 g, T2 = 232 g. A lot of 400 packs (EU): weigh 30 at random. 1 below 241 g or none: passed for this rule; 3 or more: rejected; 2: weigh 30 more - with up to 4 below 241 g in all 60 the lot passes, with 5 it is rejected. None below 232 g, and the mean of the first 30 + 0.503 × s ≥ 250 g.

On the scale it is done while you weigh

UP↑SCALE takes every pack from your verified scale (RS-232 adapter with EXACT WEIGHT) - no typing; with 🔏 LEGAL MODE (ENTERPRISE) every bag is stored on the adapter with its own number. Check-weighing shows every pack against T1 and T2 while you fill, the statistics show the mean, spread and Cp/Cpk, and the lot check gives the verdict with a printable lot report (PRO) - also for the USA along NIST Handbook 133. ℮ control step by step.

℮ prepackages: questions and answers

What is the TNE of a 500 g pack?

15 g (packs of 500 g to 1 kg). So T1 = 485 g and T2 = 470 g. For 250 g the TNE is 9 g (T1 241 g, T2 232 g), for 1 kg 15 g (T1 985 g, T2 970 g).

What do T1 and T2 mean?

T1 = Qn - TNE: at most 2.5 % of the packs of a lot (FPackV: 2 %) may be below it. T2 = Qn - 2 × TNE: no pack may be below it. And the mean of the lot must reach the nominal quantity.

How many packs must I weigh for an ℮ check?

Along 76/211/EEC (also the FPackV), packs not opened: 30 for a lot of 100-500 packs, 50 up to 3,200 and 80 above - and as many again when the first sample lies between acceptance and rejection. Lots under 100 packs are checked pack by pack. Opened packs (destructive test): 20, only for lots from 100 packs. OIML R 87:2016 has one sample size for each lot size, e.g. 49 for 100 packs and 98 from 600.

What is the k factor of the mean criterion?

A sample only estimates the mean of the lot, so the rule is mean + k × s ≥ Qn. 76/211/EEC gives k = 0.503 for 30 packs, 0.379 for 50 and 0.640 for 20 opened packs (k = t / √n). OIML R 87 calls it the sample correction factor SCF and also takes the lot size into account (e.g. 0.28 for 49 packs of a lot of 100). The sample mean may be a little below Qn - a big spread still rejects a lot through the T1 and T2 rules.

Does the calculator work for OIML R 87?

Yes: choose International: OIML R 87:2016. You get the tolerable deficiency T of Table 1 (also above 10 kg, rounded up to the whole g above 1 kg), T1 and T2, and the sample plan of Table 2 / Annex I with the sample correction factor SCF for your lot size - and the lot check of your weights.

Does the ℮ check need a verified scale?

Yes. Prepackages are checked with a verified scale. This calculator does the maths - the weights must come from a verified scale, and the official check is made by the weights and measures office.

Do the rules apply to ml as well as g?

Yes. The same table is used for volume: a 500 ml bottle has a TNE of 15 ml. The check is made on the net content - by weight via the density, or by volume.

More free calculators

No sign-up, nothing is sent anywhere - the maths runs in your browser. All calculators

Roast loss calculator

The roast loss in %, what a kg of roasted coffee costs you and how much green coffee an order needs.

Coffee ratio calculator

Coffee to water in grams for pour-over, French press, AeroPress, cold brew and espresso - and the extraction yield from TDS.

USP <41> minimum weight

Repeatability, minimum weight (2000 s) and accuracy of your balance from your weighings.

Gold value & density test

Fine gold, value and payout of a piece by karat - and the density test that spots fakes.

Baker's percentage & hydration

The true hydration of your dough with a levain or poolish - and a dough for any number of pieces from the percentages.

Dough temperature (DDT)

The water temperature for your desired dough temperature, with the friction of your mixer.

Cannabis infusion & dose

mg THC and CBD per gram of your butter, oil or tincture - and the infusion for a dose per portion.

Ice cream & gelato: PAC, POD

Fat, milk solids, sugars, sweetness and anti-freezing power of your mix - the freezing point and the serving temperature.

Brix & syrup calculator

Water or sugar for a target °Brix, the end weight when boiling down a jam or syrup, the sugar stage - and blending two syrups.

Last updated · by Johann Anderson, FARM 23 SL

READY TO UP↑SCALE YOUR SCALE?

Start with the free version - the board costs under 15 EUR and you may never need more. If you do, unlock PRO from 4.43 EUR a month, 46.90 EUR a year or once for 119.90 EUR incl. VAT - or ENTERPRISE & COMPLIANCE from 13.00 EUR a month (once: 599.00 EUR). The lifetime licences are once and forever, no subscription needed; no advertisements, everything works offline, updates stay free.