FIRMWARE UP↑DATE  (DIY)

To update your firmware, just connect your scale via USB to your computer/notebook and use the yellow install buttons to start.

This is the right version for your TinyTronics ESP32-C3 RS232 Adapter! Just plug it and click INSTALL!

HOW TO?

CLICK FOR MORE INFO (READ ON FIRST INSTALL!)
  1. Plug your board into this computer with a USB-C data cable.
  2. Click INSTALL at the newest version and choose the port of the board.
  3. On the very first time you are going to install the firmware, it will probably "fail to connect"! Simply hold BOOT, press and release RESET (the other button), then release BOOT
  4. "Erase device?" New board: you may tick it. Update: do NOT tick it - an erase deletes your pins, settings, THINGS and recipes (the PRO licence comes back by itself through the app).
  5. After "Installation complete": press RESET, then connect "UP↑SCALE (DIY)" in the app.
  6. After the first install, the app MAYBE take forever after you was hitting the CONNECT button the first time. If its not loading after a few seconds, please just refresh your browser once and also go sure the board has restarted once after your installation (unplug and plug it again to be sure!) Now hit CONNECT again!

More detailed infos: For the TinyTronics Adapter: all steps in the adapter guide. If you build your own board - here you can find parts, wiring, pins and help: UP↑SCALE DIY guide. For more info about how to connect to the scale after the installation, here you find all info for the TinyTronics adapter (its the same for your own builds).

Please use this updates only for your "DIY / TinyTronics" scale! If you want to update an other scale, please click here!

LATEST VERSION

V 01.01312 (21.11.2026)

Legal part (LEGAL MODE): v1.3 · ID 2581DF3A

UPDATE NOT POSSIBLE ON THIS DEVICE!
Sorry, the web-update is not working on mobiles or with all browsers, but only with computers or notebooks and on Chrome, Opera or Edge!
Please open https://up-scales.com/update/ from a computer/notebook in one of the supported browsers to update your scale firmware from there.

PLEASE NOTE:

Best also update your App html file after a firmware update, specially if you are using it local. Here the latest version: upscale-420-710.html

Last updated · by Johann Anderson, FARM 23 SL